◆ 螺牙规格:PG牙、公制牙(Metric)、G牙、NPT牙。

◆ 产品材质:A.C.E部分采用UL认可之尼龙PA66(防火等级UL94V2)制成;(可定制UL认可的V-0防火等级尼龙原料);B.D部分采用三元乙丙耐候橡胶制成。(可定制耐寒、耐高温橡胶;耐高酸诚、耐化学与抗腐蚀橡胶)。

◆ 保护等级:IP68。

◆ 工作温度:静态-40°C至100°C，或联间可耐热至120°C;动志20°C至80°C，或瞬间可耐至100°C。

◆ 产品特性:特殊夹紫爪与与夹紧图之设计，夹紧电缆范围大，抗拉力特强，可防水、防尘、抗盐、耐弱酸、酒精、油、油脂及一般溶剂。

◆ 颜色种类:黑色、灰色，其它颜色可定体。

◆ 本系列线卡，均为插钉式，钢钉直接附在线卡上,可大量节省工时，降低施工成本。

◆ Thread: PG, Metric, G, and NPT thread.

◆ Materials: UL approved Nylon PA66 (Flammability UL 94V - 2) for A.C.E parts. (Can be made with flammability UL 94V - 0). EPDM rubber, resistant to high temperature, strong acid, alkali, etc.

◆ Protection degree: IP66.

◆ Working temperature: -40°C to 100°C.

◆ Features: Well - designed claws and seals. The sealing nut clicks and firmly holds the cable even after reopening. It fits a wider range of cables and resists salt water, weak acid, alcohol, oil, grease, and common solvents.

◆ Color: Black, Gray. Other colors are available as requested.

◆ 材质:UL合格之NYLON 66，防护等级94V-2。

◆ 颜色:本色/黑色。

◆ 背胶:3M胶粘贴，可省去钻孔。尼龙扎带穿孔固定电线，可以重复使用。

◆ 用途:使用时将底面胶带撕去封纸，再将固定座贴贴于机板上，扎带穿进扎带孔收紧固定。

◆ Material: UL94V-2 flame rated, UL approved Nylon 66 with adhesive stickers.

◆ Color: grey/black.

◆ Purpose: when using tear bottom tape to seal paper, then fixedpaste on the boards,cable tie wear fixed wire into the cable tiehole tighten, back glue type drilling machine board.

◆ Characteristic: the back glue can be quickly fxed mount, cable tie beam line maintenance convenient, does not occupy a space.

◆ 材质:采用PE料制成。

◆ 使用方法:先用保护带固定起点一端，然后按顺时针方向环绕束紧，即可将电线束为一体。

◆ 用途:作为保护电线不受磨损及绝缘用，并可改进电线弯曲的美观。

◆ Material: PE.

◆ How to use: Fix one end with safety belt first, then the wires clockwise to make them tighten.

◆ Characteristic: A protection wear for electric wires, andmake them insulation and look nice.